[20:31:11] Descending
[20:32:32] Overspeed entered
[20:32:32] Overspeed left after a max speed of 288 kts
[20:32:33] Overspeed entered
[20:32:33] Overspeed left after a max speed of 288 kts
[20:32:34] Overspeed entered
[20:34:49] Overspeed left after a max speed of 327 kts
[20:34:49] Overspeed entered
[20:34:49] Overspeed left after a max speed of 326 kts
[20:36:29] Overspeed entered
[20:38:30] Flaps set to position 1 at 19284 ft at 353 kts
[20:38:45] Flaps set to position 0 at 18561 ft at 352 kts
[20:41:50] Overspeed left after a max speed of 358 kts
[20:42:23] Exceeded 250 KIAS below 10,000 feet MSL
[20:42:49] Speed corrected at 9222 ft after a max speed of 283 kts
[20:42:55] Approaching
[20:44:33] Flaps set to position 1 at 6323 ft at 196 kts
[20:45:55] Stalling
[20:46:01] Flaps set to position 2 at 5192 ft at 133 kts
[20:46:18] Stall recovered after a minimum speed of 123 kts
[20:46:20] Stalling
[20:46:23] Stall recovered after a minimum speed of 132 kts
[20:46:24] Stalling
[20:46:29] Stall recovered after a minimum speed of 135 kts
[20:47:12] Gear lever lowered at 4672 ft at 141 kts
[20:47:30] Gear lever raised at 4677 ft at 145 kts
[20:48:17] Flaps set to position 3 at 4508 ft at 167 kts
[20:53:01] Gear lever lowered at 3163 ft at 203 kts
[20:53:10] Flaps set to position 4 at 3091 ft at 200 kts
[20:53:47] Final approach, 163 kts
Landing
Click to expand/close
[20:55:05] Touched down at -407 fpm, gear lever: down, pitch: -3, roll: level, 190 kts
[20:55:30] Landed in 4100 ft, fuel: 4234 lb, weight: 64673 lb
[20:55:30] Taxiing to gate
[20:57:29] Flaps set to position 3
[20:57:32] Flaps set to position 1
[20:57:36] Flaps set to position 0
[21:04:50] The flight may now be ended
[21:04:50] Arrived, flight duration: 02:29
[21:05:03] Engine 1 is off
[21:05:08] Engine 2 is off
[21:06:23] Sim paused
[21:06:30] Sim unpaused
Your PIREP is pending due to the following criteria found in your log: A stall was detected
-HM | Mark Wolf
Unfortunately with the number of stalls in this PIREP I am UN able to approve it. If you need any help with the CRJ on approach let me know I fly them all the time and more than willing to give you a hand
-Justin Schroeder