SmartCARS Log
2024-07-23T05:58:26.615Z - Using Microsoft Flight Simulator
2024-07-23T05:58:26.615Z - Flying Airbus A330-900neo Korean Air
2024-07-23T05:58:26.616Z - Now boarding
2024-07-23T05:58:26.616Z - COM1: 122.800, COM2: 121.500, NAV1: 112.19, NAV2: 112.19, Transponder: 7000
2024-07-23T06:14:18.035Z - Pushing back with 41783 lbs of fuel
2024-07-23T06:14:44.916Z - Engine 2 On
2024-07-23T06:15:16.493Z - Engine 1 On
2024-07-23T06:17:31.402Z - Taxiing out
2024-07-23T06:18:51.144Z - Flaps set to 20%
2024-07-23T06:18:53.170Z - Flaps set to 40%
2024-07-23T06:23:41.738Z - Taking off
2024-07-23T06:23:59.645Z - Climbing at 166 kts, 8 degrees pitch, -1 degrees bank
2024-07-23T06:24:15.986Z - Gear lever raised
2024-07-23T06:24:25.144Z - Flaps set to 20%
2024-07-23T06:24:33.845Z - Flaps set to 0%
2024-07-23T06:56:00.910Z - Cruising at 41000 ft
2024-07-23T07:22:45.675Z - COM1 active frequency set to 132.500
2024-07-23T07:36:15.040Z - Descending with 176 nm to go
2024-07-23T07:55:15.926Z - Cruising at 18000 ft
2024-07-23T08:02:18.489Z - Descending with 44 nm to go
2024-07-23T08:10:15.044Z - Approach started at 8053 ft AGL with 13 nm to go
2024-07-23T08:13:47.976Z - Flaps set to 20%
2024-07-23T08:16:03.450Z - Flaps set to 40%
2024-07-23T08:16:06.003Z - Flaps set to 60%
2024-07-23T08:17:49.942Z - Flaps set to 80%
2024-07-23T08:18:16.981Z - Flaps set to 100%
2024-07-23T08:20:02.939Z - Gear lever lowered
2024-07-23T08:20:07.526Z - On final at 989 ft with 4 nm to go at 142 kts, 2 degrees pitch, 9 degrees bank
2024-07-23T08:21:30.094Z - Touched down at -150 fpm, 1.1g, 132 kts, 4 degrees pitch, -1 degrees bank
2024-07-23T08:22:02.102Z - Taxiing to gate, landed in 4275 ft
2024-07-23T08:22:48.588Z - Flaps set to 80%
2024-07-23T08:22:51.652Z - Flaps set to 60%
2024-07-23T08:22:53.716Z - Flaps set to 40%
2024-07-23T08:22:56.261Z - Flaps set to 20%
2024-07-23T08:23:04.348Z - Flaps set to 0%
2024-07-23T08:29:33.306Z - Engine 2 Off
2024-07-23T08:29:34.333Z - Engine 1 Off
2024-07-23T08:29:34.334Z - Paused
2024-07-23T08:29:36.363Z - Unpaused
No comments have been left on this report.