01:55:53 - Approach started at 8029 ft AGL with 28 nm to go
01:57:01 - Exceeded 250 kts. below 10,000 ft. MSL. Maximum speed of 255 kts.
02:09:10 - COM1 active frequency set to 127.400
02:16:37 - Flaps set to 20%
02:18:12 - Flaps set to 40%
02:18:19 - Flaps set to 60%
02:18:32 - COM1 active frequency set to 128.450
02:21:25 - Gear lever lowered
02:21:48 - Flaps set to 80%
02:21:56 - Flaps set to 100%
02:22:05 - On final at 1001 ft with 4 nm to go at 153 kts, -1 degrees pitch, 0 degrees bank
Landing
Click to expand/close
02:23:37 - Touched down at -662 fpm, 1.9g, 112 kts, 12 degrees pitch, 2 degrees bank
02:23:54 - Flaps set to 80%
02:23:56 - Flaps set to 60%
02:23:58 - Flaps set to 40%
02:23:59 - Flaps set to 20%
02:24:06 - Flaps set to 0%
02:24:27 - Taxiing to gate, landed in 1054 m
02:24:32 - COM1 active frequency set to 128.450
02:24:50 - COM1 active frequency set to 120.300
02:27:52 - Engine 2 Off
02:27:52 - Engine 1 Off
Your PIREP is pending staff review because you exeeded the maximum landing rate of -600
-PIREP Bot