08:42:13 - Approach started at 8444 ft AGL with 49 nm to go
08:42:54 - COM1 active frequency set to 124.070
08:47:34 - COM1 active frequency set to 126.400
08:53:18 - Gear lever lowered
08:53:47 - Flaps set to 20%
08:53:50 - Flaps set to 40%
08:53:52 - Flaps set to 60%
08:53:54 - COM1 active frequency set to 127.300
08:53:55 - Flaps set to 80%
08:53:58 - Flaps set to 100%
08:56:06 - Pitch exceeded 10 degrees nose down
08:56:31 - On final at 974 ft with 3 nm to go at 139 kts, -7 degrees pitch, -5 degrees bank
08:58:01 - Bank exceeded 30 degrees
Landing
Click to expand/close
08:58:04 - Touched down at -1045 fpm, 3.0g, 0 kts, 11 degrees pitch, -5 degrees bank
08:58:06 - Taxiing to gate, landed in 0 ft
08:59:19 - Flaps set to 80%
08:59:21 - Engine 1 Off
08:59:22 - Engine 2 Off
08:59:22 - Flaps set to 60%
08:59:25 - Flaps set to 40%
Your PIREP is pending staff review because you exeeded the maximum landing rate of -600
-PIREP Bot
Excessive bank, pitch, and landing rate. Ensure you're configured correctly before landing. Reach out if I can help at all.
-John Kronberg